🔬 Tube Type Library (11 options)
| Tube Spec | Heating | Cooling | Recovery |
|---|---|---|---|
| 16.45×0.40 Copper | ✓ | ✓ | ✓ |
| 16.45×0.75 Copper | ✓ | ✗ | ✓ |
| 16.45×1.00 Copper | ✓ | ✗ | ✓ |
| 16.45×1.50 Steel | ✓ | ✗ | ✓ |
| 16.45×1.00 SS 304 | ✓ | ✗ | ✗ |
| 16.45×1.00 SS 316 | ✓ | ✗ | ✗ |
| 16.45×0.40 Copper tinned | ✓ | ✗ | ✗ |
| 16.45×1.75 Copper tinned | ✓ | ✗ | ✗ |
| 16.45×0.80 Copper tinned | ✓ | ✗ | ✗ |
| 16.45×0.60 SS 304 | ✓ | ✗ | ✗ |
| 16.45×0.60 SS 316 | ✓ | ✗ | ✗ |
💡 Tip
Standard copper (16.45×0.40) is the only tube type compatible with ALL coil types. Specify this unless you have a specific material requirement.
🔬 Fin Type Library (12 options)
| Fin Spec | Heating | Cooling | Recovery |
|---|---|---|---|
| 0.11mm Aluminium | ✓ | ✓ | ✓ |
| 0.11mm Prepainted Alu | ✓ | ✗ | ✓ |
| 0.10mm Copper | ✓ | ✗ | ✓ |
| 0.10mm Copper tinned | ✓ | ✗ | ✗ |
| 0.20mm Aluminium | ✓ | ✗ | ✓ |
| 0.20mm Copper | ✓ | ✗ | ✗ |
| 0.20mm Copper tinned | ✓ | ✗ | ✗ |
| 0.25mm Aluminium | ✓ | ✗ | ✓ |
| 0.25mm Prepainted Alu | ✓ | ✗ | ✓ |
| 0.40mm Aluminium | ✓ | ✗ | ✗ |
| 0.15mm AlMg 2.5 | ✓ | ✗ | ✗ |
| 0.20mm AlMg 2.5 | ✓ | ✗ | ✗ |
💡 Tip
0.11mm Aluminium is the universal default. Use pre-painted or BlyGold for corrosive environments.
📐 Geometry & Configuration
| Parameter | Options |
|---|---|
| Geometry | P40, P3012, P25, P20 |
| Fin Pitch | 2.00–12.00 mm (9 options) |
| Frame Type | FeZn 1.5mm, Aluminium, Steel variants |
| Headers | Auto / Manual sizing |
🛡️ Finishing & Protection
| Option | Application | Cost |
|---|---|---|
| No Extra Finishing | Standard indoor | Default |
| BlyGold Polual XT | Coastal, industrial, corrosive | Premium |
| ESSOTHERM 500 | Specialty heat transfer fluid | Premium |
♻️ Recovery Coil Circuits
Recovery coils use dual independent circuits (Return + Supply):
| Parameter | Options |
|---|---|
| Circuit Type | Return Circuit / Supply Circuit |
| Geometry | Independent per circuit |
| Fin Pitch | Independent per circuit |
| Tube/Fin Type | Independent per circuit |
| Frame Materials | GI Steel, SS 304, SS 316, Aluminium |
| Glycol Options | Ethylenic / Propylenic (weight & volume based) |